VJs · Sat Nov 21, 2026 · dadaLab · 7 to 11 PM

Light the
walls.

dadaLab's room is a four-projector, 180-degree wrap with DMX lighting. We want live VJs, TouchDesigner and generative artists, projection mappers, interactive and camera-based work, and lighting people to fill it for four hours. 100% of profits go to Capital Area Counseling.

Photo: Logan Voss

01 · The canvas

7680 × 1080,
wrapped.

Projection

4 projectors · 180°

Front and side walls, one continuous image

Server

Resolume Arena

7680 × 1080 output canvas

Input

1 × HDMI 4K

Into dadaLab's 4K capture card from FOH. The server (Resolume → Matrox) already holds the mapping.

Under 7680 wide?

Mirror · dupe · stretch

The server fits any smaller output across the full wrap

Full-res content

Slice to 4K

7680×1080 must be sliced into the 3840×2160 frame (two rows of two). Diagram in the tech sheet.

Also available

Single projector

Short-throw over the stage onto the rear wall, HDMI drop at the stage

02 · The light

DMX grid,
Art-Net ready.

  • 01Standard rig on the ceiling grid: 10× ADJ 12PX Hex (RGBWA+UV), 2× Blizzard LB PAR Hex, 2× Chauvet Shocker Panel 480 strobesFixed positions, 6-channel / 4-channel modes
  • 02Control your way: iPad presets for static looks, or take it live over wireless DMX (3 or 5 pin) or Art-Net via an Enttec ODE Mk2 node on the venue WiFi
  • 03Extra fixtures on request: up to 42 Rasha battery-powered RGBWA+UV units (Core, Tritone, Crux)
  • 04No lasers this time. dadaLab's laser package is an add-on we haven't bookedThat may change if ticket sales allow. We'll tell confirmed VJs first.
  • 05Tech check at dadaLab before the night so mapping and patching are done when doors open
  • 06Fee: $100 stipend, or donate your time, or tell us your rateIt's a benefit, so be honest and we'll work with it
Multicolor long-exposure light drawing
Glen Ardi

03 · Who we're looking for

Pick a lane.

  • 01Live VJ setMix to the DJs in real time, one set or the whole night
  • 02Generative / TouchDesignerAudio-reactive systems, feedback, particles, the lot
  • 03Projection mappingHelp us treat the room's geometry as part of the show
  • 04Interactive / camera-basedWork that reacts to the crowd
  • 05Pre-made loops and contentSend files, we run them in the loop between live sets
  • 06Lighting / DMXDesign and run the light show
Marbled teal and orange fluid abstract
Pawel Czerwinski
Blue and pink light wave lines on black
Zak
Pink and green fibrous generative texture
Alex Perez
Liquid chrome ripples in blue, pink and orange
Logan Voss

04 · Why do it

What you get.

  • [ 01 ]

    A 180° projection wall for four hoursNot a side screen. The whole wall, in front of 100 people.

  • [ 02 ]

    DocumentationPhotos and video of your work on the wall, delivered by Dec 5, free to reuse

  • [ 03 ]

    "Visuals by" credit everywherePosters, socials, the ticket page and the projection loop itself

  • [ 04 ]

    The dadaLab crowdAustin's immersive-art and TouchDesigner community will be in the room

05 · How it works

Three steps.

Golden light trails spiraling on black
Mariola Grobelska
  1. 01Fill out the form. Links to your work, what you do, your software and gear, availability on Nov 21, and whether you can make a tech check.Also tell us if you DJ, know DJs we should book, or want to help with posters, web, photo or production.
  2. 02We reply with a plan. Who runs what, when, and how the signal chain works.
  3. 03Tech check, then show night. Map it once at dadaLab, then play.

07 · VJ FAQ

Before you ask.

What exactly am I outputting to?
dadaLab's media server. You send one HDMI into a 4K capture card at FOH; the server (Resolume Arena, out to a Matrox unit) already holds the mapping for the four-projector 7680 × 1080 wrap.
My content isn't 7680 × 1080. Is that a problem?
No. The server can mirror, duplicate or stretch anything narrower to fill the full wrap. Many VJs run a 1920 × 1080 or 3840 × 1080 canvas and let the server tile it.
I want to use the full 7680 × 1080 canvas. How?
Your output must be sliced into the 3840 × 2160 frame the capture card sees: two rows of two 1920 × 1080 tiles. The slicing diagram is in the tech sheet (opens in a new tab). Bring it to the tech check.
Is there a simpler single-projector option?
Yes. A short-throw projector above the stage hits the rear projection wall, with an HDMI drop at the stage. Good for a single-screen set or a backup.
Can I run the lights?
Yes. The standard rig is 10 ADJ 12PX Hex, 2 Blizzard LB PAR Hex and 2 Chauvet Shocker Panel strobes on the ceiling grid. Control via iPad presets, wireless DMX (3 or 5 pin), or Art-Net through an Enttec ODE Mk2 on the venue WiFi. Extra battery-powered fixtures are available on request.
Will there be lasers?
Not currently. dadaLab offers a laser add-on (2× Unity RAW 10 plus a hazer) that we haven't booked. That may change depending on ticket sales; if it does, we'll tell confirmed VJs first. If you're a certified laser operator, mention it on the form.
Is there a tech check?
Yes, at dadaLab before the night, so mapping, patching and timing are sorted before doors. The form asks if you can make it.
What's the fee?
A $100 stipend, or donate your time, or tell us your rate. It's a benefit: sponsors cover costs and 100% of profits go to Capital Area Counseling (opens in a new tab).
Do I have to be there all four hours?
No. The form has options for the whole night, part of the night, or sending pre-made loops we run between live sets.
Do I get documentation?
Yes. Photos and video of your work on the wall, delivered by Dec 5, free to reuse. You're credited as "Visuals by" on posters, socials, the ticket page and in the loop.

08 · Let's do it

Show us
your work.

Open to all Austin visual artists. Students and first-timers welcome if you can run your rig.

YES/& · Sat Nov 21, 20267:00 to 11:00 PMdadaLab (opens in a new tab) · 2008 Alexander AveAustin, TX 78722Visuals questions: contact form ↓

09 · Contact

Say hi.

Signal-chain questions, mapping ideas, or you want to see the room first. Write to us.

Goes straight to the organizer. We reply within a couple of days.